Enabling L2VPN
For SPBM settings to take effect, you must enable L2VPN on BEBs.
If L2VPN is also enabled on BCBs and the BCBs use aggregate interfaces to connect to BEBs, you must disable the static source check feature on the aggregate interfaces. This restriction applies to the HPE FlexFabric 5940 switch series.
To disable the static source check feature, use the undo mac-address static source-check enable command. For information about the static source check feature, see Layer 2—LAN Switching Configuration Guide.
To enable L2VPN:
Step | Command | Remarks |
|---|---|---|
1. Enter system view. | system-view | N/A |
2. Enable L2VPN. | l2vpn enable | By default, L2VPN is disabled. |