Enabling SPBM
You must enable SPBM both globally and on the provider network ports on all BEBs and BCBs in the SPBM network.
To enable SPBM:
Step | Command | Remarks |
|---|---|---|
1. Enter system view. | system-view | N/A |
2. Enable SPBM globally and enter SPBM view. | spbm | By default, SPBM is disabled globally. |
3. Return to system view. | quit | N/A |
4. Enter Layer 2 Ethernet interface view or Layer 2 aggregate interface view. | interface interface-type interface-number | N/A |
5. Enable SPBM on the interface. | spbm enable | By default, SPBM is disabled on interfaces. |