display fip-snooping flushing-rules

Use display fip-snooping flushing-rules to display the FIP snooping rules that are being flushed.

Syntax

display fip-snooping flushing-rules [ enode | fcf ] [ vlan vlan-id ]

Views

Any view

Predefined user roles

network-admin

network-operator

Parameters

enode: Specifies ENode FIP snooping rules.

fcf: Specifies FCF FIP snooping rules.

vlan vlan-id: Specifies a VLAN by its ID in the range of 1 to 4094. If you do not specify a VLAN, this command displays the FIP snooping rules that are being flushed in all VLANs.

Usage guidelines

Only the FIP snooping rules that have been flushed can filter FCoE frames. FIP snooping rules that are being flushed cannot filter FCoE frames.

If you do not specify enode or fcf, this command displays both ENode and FCF FIP snooping rules that are being flushed.

Examples

# Display the FIP snooping rules that are being flushed.

<Sysname> display fip-snooping flushing-rules
VLAN 2:
  FCF flushing-rules information:
    Interface   Source MAC/Mask      Destination MAC/Mask
    XGE1/0/1    0000-1234-0212/48    0efc-0034-0111/24
  ENode flushing-rules information:
    Interface   Source MAC/Mask      Destination MAC/Mask
    XGE1/0/2    0efc-0034-0202/48    0000-1234-0101/48

VLAN 5:
  FCF flushing-rules information:
    Interface   Source MAC/Mask      Destination MAC/Mask
    XGE1/0/3    0000-1234-2212/48    0efc-0034-2111/24

Related commands

display fip-snooping rules