fcoe fcf-priority

Use fcoe fcf-priority to set the FCF priority for a VFC interface.

Use undo fcoe fcf-priority to restore the default.

Syntax

fcoe fcf-priority priority

undo fcoe fcf-priority

Default

The FCF priority of a VFC interface is 128.

Views

VFC interface view

Predefined user roles

network-admin

Parameters

priority: Specifies the FCF priority in the range of 0 to 255. The smaller the value, the higher the priority.

Usage guidelines

Only FCF, FCF-NPV, and NPV switches support this command.

This command takes effect only on VFC interfaces operating in F mode. You can configure this command on VFC interfaces operating in E or NP mode, but it does not take effect.

The VFC interface FCF priority is used in the fcf priority field in a solicited Discovery Advertisement.

An ENode selects the FCF switch with the highest priority from the FCF switches sending Discovery Advertisements and sends a FLOGI request to it for login.

Examples

# Set the FCF priority to 12 for VFC 1.

<Sysname> system-view
[Sysname] interface vfc 1
[Sysname-Vfc1] fcoe fcf-priority 12