FC and FCoE commands
Only the following switches support FC:
HPE FlexFabric 5940 2-slot Switch (JH397A).
HPE FlexFabric 5940 4-slot Switch (JH398A).
HPE FlexFabric 5930-2Slot+2QSFP+ Switch (JH178A).
HPE FlexFabric 5930-2Slot+2QSFP+ TAA Switch (JH187A).
HPE FlexFabric 5930-4Slot Switch (JH179A).
HPE FlexFabric 5930-4Slot TAA Switch (JH188A).
When an LSWM124XG2QFC (JH184A) interface module is installed on any of the preceding switches, only the interface module supports FC.
For FC and FCoE to work, the device must operate in advanced or expert mode. For more information about system operating modes, see Fundamentals Configuration Guide.