Configuring a port-specific load sharing mode
Before you configure a port-specific load sharing mode, make sure you have bound a minimum of one physical interface to the IRF port.
To configure a port-specific load sharing mode for an IRF port:
Step | Command | Remarks |
|---|---|---|
1. Enter system view. | system-view | N/A |
2. Enter IRF port view. | irf-port member-id/port-number | N/A |
3. Configure the port-specific load sharing mode. | irf-port load-sharing mode { destination-ip | destination-mac | source-ip | source-mac } * | By default, the global IRF link load sharing mode applies. If you execute this command multiple times, the most recent configuration takes effect. |