evb reflective-relay

Use evb reflective-relay to enable the RR mode for an S-channel.

Use undo evb reflective-relay to disable the RR mode for an S-channel.

Syntax

evb reflective-relay

undo evb reflective-relay

Default

The RR mode for an S-channel is disabled.

Views

S-channel interface view, S-channel aggregate interface view

Predefined user roles

network-admin

Usage guidelines

EVB TLVs exchanged through LLDP allow an EVB station and EVB bridge to negotiate the use of reflective relay (RR). If the EVB station requests to use the RR mode and the EVB bridge supports the RR mode, the bridge performs the following operations:

• Automatically enables the RR mode for the S-channel

• Adds the corresponding command line to the configuration file.

You can also use this command to manually enable or disable the RR mode for an S-channel.

Examples

# Enable the RR mode on S-Channel 1/0/1:10.

<Sysname> system-view
[Sysname] interface s-channel 1/0/1:10
[Sysname-S-Channel1/0/1:10] evb reflective-relay

# Enable the RR mode on Schannel-Aggregation 1:10.

<Sysname> system-view
[Sysname] interface schannel-aggregation 1:10
[Sysname–Schannel-Aggregation1:10] evb reflective-relay