display evb cdcp

Use display evb cdcp to display CDCP negotiation information.

Syntax

display evb cdcp [ interface interface-type interface-number ]

Views

Any view

Predefined user roles

network-admin

network-operator

Parameters

interface interface-type interface-number: Specifies an interface (Layer 2 Ethernet interface or Layer 2 aggregate interface) by its type and number. If you do not specify an interface, the command displays CDCP negotiation information for all interfaces with EVB enabled.

Examples

# Display CDCP negotiation information for all interfaces with EVB enabled.

<Sysname> display evb cdcp

---------------------------Bridge-Aggregation1---------------------
S-component capability               : Local-supported/Remote-not supported
Supported S-Channel numbers per-port : Local-167/Remote-0
SVID range                           : 2-4094
SCID requested from remote           :
SCID/SVID pair list allocated        :
 <1, 1>

--------------------------------FortyGigE1/0/1--------------------------
S-component capability               : Local-supported/Remote-supported
Supported S-Channel numbers per-port : Local-167/Remote-167
SVID range                           : 2-4094
SCID requested from remote           :
 1, 2, 3, 4, 6, 10, 11, 12, 34, 35, 67
SCID/SVID pair list allocated        :
 <1, 1>,         <2, 3>,         <3, 2>,         <4, 5>,         <6, 4>,
 <10, 9>,        <11, 6>,        <12, 7>,        <34, 23>,       <35, 35>,
 <67, 67>

Table 1: Command output

Field	Description
S-component capability	Port-mapping S-VLAN component capability on the EVB bridge and the EVB station.
Supported S-channel numbers per-port	Number of S-channels supported by the EVB bridge and the EVB station.
SVID range	SVID range on the EVB bridge.
SCID requested from remote	SCIDs requested by the EVB station in ascending order.
SCID/SVID pair list allocated	List of (SCID, SVID) pairs allocated by the EVB bridge.

prev	up	next
description	home	display evb evb-tlv