default
Use default to restore the default settings for an S-channel interface or a VSI interface.
Syntax
default
Views
S-channel interface view, VSI interface view, S-channel aggregate interface view, VSI aggregate interface view
Predefined user roles
network-admin
Usage guidelines
CAUTION: The default command might interrupt ongoing network services. Make sure you are fully aware of the impacts of this command when you execute it on a live network. | ||
This command might fail to restore the default settings for some commands for reasons such as command dependencies and system restrictions. Use the display this command in interface view to identify these commands. Then use their undo forms or follow the command reference to individually restore their default settings. If your restoration attempt still fails, follow the error message instructions to resolve the problem.
Examples
# Restore the default settings for S-Channel interface S-Channel 1/0/1:10.
<Sysname> system-view [Sysname] interface s-channel 1/0/1:10 [Sysname–S-Channel1/0/1:10] default
# Restore the default settings for VSI interface S-Channel 1/0/1:10.1.
<Sysname> system-view [Sysname] interface s-channel 1/0/1:10.1 [Sysname–S-Channel1/0/1:10.1] default