irf auto-update enable
Use irf auto-update enable to enable the software auto-update feature.
Use undo irf auto-update enable to disable the software auto-update feature.
Syntax
irf auto-update enable
undo irf auto-update enable
Default
The software auto-update feature is enabled.
Views
System view
Predefined user roles
network-admin
Usage guidelines
This command automatically propagates the current software images of the master device in the IRF fabric to any devices you are adding to the IRF fabric.
To ensure a successful software update, verify that the new device you are adding to the IRF fabric has sufficient storage space for the new software images. If sufficient storage space is not available, the device automatically deletes the current software images. If the reclaimed space is still insufficient, the device cannot complete the auto-update. You must reboot the device, and then access the Boot menu to delete files.
You must manually update the new device with the software images running on the IRF fabric in the following situations:
Software auto-update is disabled.
Software auto-update fails to update software. This situation might occur if the IRF fabric cannot identify the software version used on the new device.
Examples
# Enable the software auto-update feature.
<Sysname> system-view [Sysname] irf auto-update enable