evb vsi active

Use evb vsi active to activate a VSI interface or VSI aggregate interface.

Use undo evb vsi active to deactivate a VSI interface or VSI aggregate interface.

Syntax

evb vsi active

undo evb vsi active

Default

A VSI interface or VSI aggregate interface is not activated.

Views

VSI interface view, VSI aggregate interface view

Predefined user roles

network-admin

Usage guidelines

Configurations such as traffic monitoring on a VSI interface or VSI aggregate interface take effect only after the VSI interface or VSI aggregate interface is activated. When a VSI interface or VSI aggregate interface is not activated, do not make any configurations other than filters on the either interface. For more information about traffic monitoring, see ACL and QoS Configuration Guide.

Activate a VSI interface or VSI aggregate interface after configuring a VSI filter, and deactivate a VSI interface or VSI aggregate interface before removing a VSI filter.

Examples

# Activate the VSI interface S-Channel 1/0/1:10.1.

<Sysname> system-view
[Sysname] interface s-channel 1/0/1:10.1
[Sysname–S-Channel1/0/1:10.1] evb vsi active

# Activate the VSI aggregate interface Schannel-Aggregation 1:10.1.

<Sysname> system-view
[Sysname] interface schannel-aggregation 1:10.1
[Sysname–Schannel-Aggregation1:10.1] evb vsi active

Related commands

evb vsi filter