evb default-manager

Use evb default-manager to specify the default VSI manager.

Use undo evb default-manager to restore the default.

Syntax

evb default-manager { { ip ip-address | ipv6 ipv6-address | name name } [ port port-number ] | local-server }

undo evb default-manager

Default

The default VSI manager is not specified.

Views

System view

Predefined user roles

network-admin

Parameters

ip ip-address: Specifies the IPv4 address of the default VSI manager.

ipv6 ipv6-address: Specifies the IPv6 address of the default VSI manager.

name name: Specifies the name of the default VSI manager, a case-insensitive string of 1 to 255 characters.

port port-number: Specifies the port number of the default VSI manager, in the range of 0 to 65535. The default port number is 8080.

local-server: Specifies the device as the default VSI manager.

Usage guidelines

When the bridge receives a VDP packet other than a De-Associate packet from a station, it contacts the VSI manager specified in the VDP packet to get VSI interface resources and policies for the station.

The VSI manager ID TLV in a VDP packet carries the VSI manager's IP address. If the value for the TLV is 0, the bridge communicates with the default VSI manager specified by this command.

Examples

# Set the IPv4 address of the default VSI manager to 192.168.100.20.

<Sysname> system-view
[Sysname] evb default-manager ip 192.168.100.20