Configuring MPLS ping for a PW
Before you configure MPLS ping for a PW, perform the following tasks:
Create a PW class, and use the vccv cc command to configure the VCCV CC type in PW class view.
Create the PW, and reference the PW class created in the previous step for the PW.
Perform the following task in any view:
Task | Command |
|---|---|
Use MPLS ping to verify the connectivity of a PW. | ping mpls [ -a source-ip | -c count | -exp exp-value | -h ttl-value | -m wait-time | -r reply-mode | -rtos tos-value | -s packet-size | -t time-out | -v ] * pw ip-address pw-id pw-id |