Configure static PW redundancy

1. Enter system view.

system-view

N/A

2. Enter cross-connect group view.

xconnect-group group-name

N/A

3. Enter cross-connect view.

connection connection-name

N/A

4. (Optional.) Specify whether to switch traffic from the backup PW to the primary PW when the primary PW recovers, and specify the wait time for the switchover.

revertive { wtr wtr-time | never }

By default, traffic is immediately switched back from the backup PW to the primary PW when the primary PW recovers.

5. Enter cross-connect PW view.

peer ip-address pw-id pw-id [ in-label label-value out-label label-value ] [ pw-class class-name | tunnel-policy tunnel-policy-name ] *

N/A

6. Configure a backup cross-connect PW and enter backup cross-connect PW view.

backup-peer ip-address pw-id pw-id in-label label-value out-label label-value [ pw-class class-name | tunnel-policy tunnel-policy-name ] *

By default, no backup PW is configured.

7. Return to user view.

return

N/A

8. Manually perform a PW switchover.

l2vpn switchover peer ip-address pw-id pw-id

N/A