Configuring basic IPv6 MPLS L3VPN
The key task in IPv6 MPLS L3VPN configuration is to manage the advertisement of IPv6 VPN routes on the MPLS backbone, including management of PE-CE route exchange and PE-PE route exchange.
To configure basic IPv6 MPLS L3VPN:
Tasks at a glance |
|---|
|
(Required.) Configuring routing between a PE and a CE |
(Required.) Configuring routing between PEs |
(Optional.) Configuring BGP VPNv6 route control |
Before configuring basic IPv6 MPLS L3VPN, perform the following tasks:
Configure an IGP on the PEs and Ps to ensure IP connectivity within the MPLS backbone.
Configure basic MPLS for the MPLS backbone.
Configure MPLS LDP on PEs and Ps to establish LDP LSPs.