Specifying the VPN label processing mode on the egress PE
An egress PE can process VPN labels in either POPGO or POP mode:
POPGO forwarding—Pops the label and forwards the packet out of the egress interface corresponding to the label.
POP forwarding—Pops the label and forwards the packet through the FIB table.
To specify the VPN label processing mode on an egress PE:
Step | Command | Remarks |
|---|---|---|
1. Enter system view. | system-view | N/A |
2. Enter BGP view. | bgp as-number | N/A |
3. Specify the VPN label processing mode as POPGO forwarding. | vpn popgo | The default is POP forwarding. |