Configuring routing between PEs

1. Enter system view.

system-view

N/A

2. Enter BGP view.

bgp as-number

N/A

3. Configure the remote PE as a BGP peer.

peer { group-name | ip-address } as-number as-number

By default, no BGP peer is created.

4. Specify the source interface for route updates.

peer { group-name | ip-address } connect-interface interface-type interface-number

By default, BGP uses the egress interface of the optimal route destined for the peer as the source interface.

5. Create the BGP VPNv4 address family and enter its view.

address-family vpnv4

By default, the BGP VPNv4 address family is not created.

6. Enable BGP VPNv4 route exchange with the specified peer.

peer { group-name | ip-address } enable

By default, BGP does not exchange BGP VPNv4 routes with any peer.