Configuring static routing to direct traffic to an MPLS TE tunnel
Perform the task on the ingress node of the MPLS TE tunnel.
To configure static routing to direct traffic to an MPLS TE tunnel:
Step | Command | Remarks |
|---|---|---|
1. Enter system view. | system-view | N/A |
2. Configure a static route to direct traffic to an MPLS TE tunnel. | For information about static routing commands, see Layer 3—IP Routing Command Reference. | By default, no static route exists on the device. The interface specified in this command must be an MPLS TE tunnel interface. |