Enabling MPLS TE
Enable MPLS TE on each node and interface that the MPLS TE tunnel traverses.
Before you enable MPLS TE, perform the following tasks:
Configure static routing or IGP to make sure all LSRs can reach each other.
Enable MPLS. For information about enabling MPLS, see "Configuring basic MPLS."
To enable MPLS TE:
Step | Command | Remarks |
|---|---|---|
1. Enter system view. | system-view | N/A |
2. Enable MPLS TE and enter MPLS TE view. | mpls te | By default, MPLS TE is disabled. |
3. Return to system view. | quit | N/A |
4. Enter interface view. | interface interface-type interface-number | N/A |
5. Enable MPLS TE for the interface. | mpls te enable | By default, MPLS TE is disabled on an interface. |