Setting a DSCP value for OpenFlow packets

Step	Command	Remarks
1. Enter system view	system-view	N/A
2. Enter OpenFlow instance view.	openflow instance instance-id	N/A
3. Set a DSCP value for OpenFlow packets.	tcp dscp dscp-value	By default, the DSCP value for OpenFlow packets is 10. This configuration takes effect only on OpenFlow packets over the main connection that the OpenFlow instance establishes with a controller through TCP.

Step

Command

Remarks

1. Enter system view

system-view

N/A

2. Enter OpenFlow instance view.

openflow instance instance-id

N/A

3. Set a DSCP value for OpenFlow packets.

tcp dscp dscp-value

By default, the DSCP value for OpenFlow packets is 10.

This configuration takes effect only on OpenFlow packets over the main connection that the OpenFlow instance establishes with a controller through TCP.

prev	up	next
Enabling an OpenFlow instance to perform QinQ tagging for double-tagged packets passing an extensibility flow table	home	Allowing link aggregation member ports to be in the deployed flow tables