ipv6 dhcp snooping log enable
Use ipv6 dhcp snooping log enable to enable DHCPv6 snooping logging.
Use undo ipv6 dhcp snooping log enable to restore the default.
Syntax
ipv6 dhcp snooping log enable
undo ipv6 dhcp snooping log enable
Default
DHCPv6 snooping logging is disabled.
Views
System view
Predefined user roles
network-admin
Usage guidelines
This command enables the DHCPv6 snooping device to generate DHCPv6 snooping logs and send them to the information center. For information about the log destination and output rule configuration in the information center, see Network Management and Monitoring Configuration Guide.
As a best practice, disable this feature if the log generation affects the device performance.
Examples
# Enable DHCPv6 snooping logging.
<Sysname> system-view [Sysname] ipv6 dhcp snooping log enable