ipv6 dhcp client stateless enable

Use ipv6 dhcp client stateless enable to enable stateless DHCPv6.

Use undo ipv6 dhcp client stateless enable to restore the default.

Syntax

ipv6 dhcp client stateless enable

undo ipv6 dhcp client stateless enable

Default

Stateless DHCPv6 is disabled.

Views

Layer 3 Ethernet interface/subinterface view

Layer 3 aggregate interface/subinterface view

Management Ethernet interface view

VLAN interface view

Predefined user roles

network-admin

Usage guidelines

With stateless DHCPv6 enabled on an interface, the interface sends an Information-request message to the multicast address of all DHCPv6 servers and DHCPv6 relay agents to request configuration parameters.

Examples

# Enable stateless DHCPv6 on VLAN-interface 2.

<Sysname> system-view
[Sysname] interface vlan-interface 2
[Sysname-Vlan-interface2] ipv6 dhcp client stateless enable