reset ipv6 dhcp server pd-in-use

Use reset ipv6 dhcp server pd-in-use to clear binding information for assigned IPv6 prefixes.

Syntax

reset ipv6 dhcp server pd-in-use [ pool pool-name | prefix prefix/prefix-len ]

Views

User view

Predefined user roles

network-admin

Parameters

pool pool-name: Clears binding information for assigned IPv6 prefixes in the address pool specified by its name, a case-insensitive string of 1 to 63 characters.

prefix prefix/prefix-len: Clears binding information for the specified IPv6 prefix. The value range for the prefix length is 1 to 128.

Usage guidelines

If you do not specify any parameters, this command clears binding information for all assigned IPv6 prefixes.

If you use this command to clear information about an assigned static binding, the static binding becomes an unassigned static binding.

Examples

# Clear binding information for all assigned IPv6 prefixes.

<Sysname> reset ipv6 dhcp server pd-in-use

# Clears binding information for assigned IPv6 prefixes in DHCPv6 address pool 1.

<Sysname> reset ipv6 dhcp server pd-in-use pool 1

# Clears binding information for the assigned IPv6 prefix 2001:0:0:1::/64.

<Sysname> reset ipv6 dhcp server pd-in-use prefix 2001:0:0:1::/64

Related commands

display ipv6 dhcp server pd-in-use