reset ipv6 dhcp server ip-in-use

Use reset ipv6 dhcp server ip-in-use to clear binding information for assigned IPv6 addresses.

Syntax

reset ipv6 dhcp server ip-in-use [ address ipv6-address | pool pool-name ]

Views

User view

Predefined user roles

network-admin

Parameters

address ipv6-address: Clears binding information for the assigned IPv6 address.

pool pool-name: Clears binding information for assigned IPv6 addresses in the address pool specified by its name, a case-insensitive string of 1 to 63 characters.

Usage guidelines

If you do not specify any parameters, this command clears binding information for all IPv6 addresses.

If you use this command to clear information about an assigned static binding, the static binding becomes an unassigned static binding.

Examples

# Clear binding information for all assigned IPv6 addresses.

<Sysname> reset ipv6 dhcp server ip-in-use

# Clears binding information for assigned IPv6 addresses in DHCPv6 address pool 1.

<Sysname> reset ipv6 dhcp server ip-in-use pool 1

# Clears binding information for the assigned IPv6 address 2001:0:0:1::1.

<Sysname> reset ipv6 dhcp server ip-in-use address 2001:0:0:1::1

Related commands

display ipv6 dhcp server ip-in-use