ip load-sharing mode per-flow

Use ip load-sharing mode per-flow to configure per-flow load sharing.

Use undo ip load-sharing mode per-flow to restore the default.

Syntax

ip load-sharing mode per-flow [ algorithm algorithm-number | [ dest-ip | dest-port | ingress-port | ip-pro | src-ip | src-port ] * | tunnel { inner | outer } ] [ slot slot-number ]

undo ip load-sharing mode [ slot slot-number ]

Default

The device performs per-flow load sharing based on the following criteria: source IP address, destination IP address, source port number, destination port number, IP protocol number, ingress port, and VLAN.

Views

System view

Predefined user roles

network-admin

Parameters

algorithm algorithm-number: Enables flow-based load sharing algorithm switching. The algorithm-number argument specifies the algorithm to be switched, and is in the range of 0 to 8. Value 0 indicates the default algorithm.

dest-ip: Identifies flows by destination IP address.

dest-port: Identifies flows by destination port.

ingress-port: Identifies flows by ingress port.

ip-pro: Identifies flows by protocol ID.

src-ip: Identifies flows by source IP address.

src-port: Identifies flows by source port.

tunnel { inner | outer }: Performs load sharing for IP tunnel packets. The inner keyword identifies flows by inner IP header information. The outer keyword identifies flows by outer IP header information.

slot slot-number: Specifies an IRF member device by its member ID.

Examples

# Configure per-flow load sharing on IRF member device 2.

<Sysname> system-view
[Sysname] ip load-sharing mode per-flow slot 2