display dhcp relay server-address
Use display dhcp relay server-address to display DHCP server addresses configured on an interface.
Syntax
display dhcp relay server-address [ interface interface-type interface-number ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
interface interface-type interface-number: Displays DHCP server addresses on the specified interface. If you do not specify an interface, this command displays DHCP server addresses on all interfaces operating in DHCP relay agent mode.
Examples
# Display DHCP server addresses on all interfaces.
<Sysname> display dhcp relay server-address Interface name Server IP address Vlan1 2.2.2.2
Table 15: Command output
Field | Description |
|---|---|
Interface name | Interface name. |
Server IP address | DHCP server IP address. |
Related commands
dhcp relay server-address