display placement reoptimize
Use display placement reoptimize to display the predicted changes that will occur when you run the placement reoptimize command.
Syntax
display placement reoptimize program { program-name [ instance instance-name ] | all }
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
program-name: Displays changes for a process (that supports process optimization) specified by its name, a case-insensitive string of 1 to 15 characters.
instance instance-name: Specifies an instance of the specified process by name, a case-insensitive string of 1 to 15 characters. Whether a process has multiple instances depends on the system software.
all: Displays changes for all processes that support process optimization.
Examples
# Display the predicted changes for all processes.
<Sysname> display placement reoptimize program all Predicted changes to the placement Program Current location New location --------------------------------------------------------------------- rm6 1/0 1/0 rm 1/0 1/0 rpm 1/0 1/0 usr 1/0 1/0 usr6 1/0 1/0 bgp 1/0 1/0 pim 1/0 1/0 igmp 1/0 1/0
The output shows the process name, current location of the active process, and new location of the active process after optimization.