bfd echo-source-ipv6

Use bfd echo-source-ipv6 to configure the source IPv6 address of BFD echo packets.

Use undo bfd echo-source-ipv6 to remove the configured source IPv6 address of BFD echo packets.

Syntax

bfd echo-source-ipv6 ipv6-address

undo bfd echo-source-ipv6

Default

No source IPv6 address is configured for BFD echo packets.

Views

System view

Predefined user roles

network-admin

Parameters

ipv6-address: Specifies the source IPv6 address for BFD echo packets.

Usage guidelines

The source IPv6 address of echo packets can only be a global unicast address.

The source IPv6 address cannot be on the same network segment as any local interface's IP address. Otherwise, a large number of ICMP redirect packets might be sent from the peer, resulting in link congestion.

Examples

# Configure the source IPv6 address of BFD echo packets as 80::2.

<Sysname> system-view
[Sysname] bfd echo-source-ipv6 80::2