bfd echo-source-ip
Use bfd echo-source-ip to configure the source IP address of BFD echo packets.
Use undo bfd echo-source-ip to remove the configured source IP address of BFD echo packets.
Syntax
bfd echo-source-ip ip-address
undo bfd echo-source-ip
Default
No source IP address is configured for BFD echo packets.
Views
System view
Predefined user roles
network-admin
Parameters
ip-address: Specifies the source IP address of BFD echo packets.
Usage guidelines
The source IP address cannot be on the same network segment as any local interface's IP address. Otherwise, a large number of ICMP redirect packets might be sent from the peer, resulting in link congestion.
Examples
# Configure the source IP address of BFD echo packets as 8.8.8.8.
<Sysname> system-view [Sysname] bfd echo-source-ip 8.8.8.8