BFD commands

The term "interface" in this chapter refers to Layer 2 aggregate interfaces and Layer 3 interfaces, including VLAN interfaces and Layer 3 Ethernet interfaces. You can set an Ethernet port as a Layer 3 interface by using the port link-mode route command (see Layer 2—LAN Switching Configuration Guide).

The following commands can be configured in Layer 2 aggregate interface view:

• bfd authentication-mode.

• bfd detect-multiplier.

• bfd min-receive-interval.

• bfd min-transmit-interval.

For more information about configuring BFD on Layer 2 aggregate interfaces, see Layer 2—LAN Switching Configuration Guide.