vrrp ipv6 mode

Use vrrp ipv6 mode to specify the operating mode for IPv6 VRRP.

Use undo vrrp ipv6 mode to restore the default.

Syntax

vrrp ipv6 mode load-balance

undo vrrp ipv6 mode

Default

IPv6 VRRP operates in standard mode.

Views

System view

Predefined user roles

network-admin

Parameters

load-balance: Specifies the load balancing mode.

Usage guidelines

When IPv6 VRRP operates in load balancing mode, the virtual IPv6 address of an IPv6 VRRP group cannot be the same as the IPv6 address of the interface where the VRRP group is configured. If the IPv6 addresses are the same, the load balancing mode cannot function.

After you create IPv6 VRRP groups on the router, you can specify their operating mode through this command. All IPv6 VRRP groups on the router operate in the specified mode.

Examples

# Specify the load balancing mode for IPv6 VRRP.

<Sysname> system-view
[Sysname] vrrp ipv6 mode load-balance

Related commands

display vrrp ipv6