vrrp mode
Use vrrp mode to specify the operating mode for IPv4 VRRP.
Use undo vrrp mode to restore the default.
Syntax
vrrp mode load-balance [ version-8 ]
undo vrrp mode
Default
IPv4 VRRP operates in standard mode.
Views
System view
Predefined user roles
network-admin
Parameters
load-balance: Specifies the load balancing mode.
version-8: Specifies the version carried in VRRP packets as 8.
Usage guidelines
After you create IPv4 VRRP groups on the router, you can specify their operating mode by using this command. All IPv4 VRRP groups on the router operate in the specified mode.
The version-8 keyword takes effect only when the version of IPv4 VRRP configured on the interface is VRRPv2. The version-8 keyword is required in the following conditions:
A router running Comware 5 software or software with version earlier than Comware 7 exists in the VRRP group.
To display the software version, use the display version command.
All routers in the IPv4 VRRP group are operating in load balancing mode.
All routers in the IPv4 VRRP group are configured with the version of VRRPv2.
Examples
# Specify the load balancing mode for IPv4 VRRP.
<Sysname> system-view [Sysname] vrrp mode load-balance
Related commands
display vrrp