downlink up-delay

Use downlink up-delay to configure the switchover delay for the downlink interfaces in a monitor link group.

Use undo downlink up-delay to restore the default.

Syntax

downlink up-delay delay

undo downlink up-delay

Default

The switchover delay for the downlink interfaces is 0 seconds. The downlink interfaces come up as soon as an uplink interface in the monitor link group comes up.

Views

Monitor link group view

Predefined user roles

network-admin

Parameters

delay: Specifies the switchover delay in the range of 1 to 300 seconds.

Usage guidelines

To avoid frequent state changes of downlink interfaces in the event that the uplink interfaces in the monitor link group flap, you can configure a switchover delay. After the switchover delay is configured, the downlink interfaces remain down until an uplink interface remains up for a period of time.

Examples

# Configure the switchover delay for the downlink interfaces in monitor link group 1 as 50 seconds.

<Sysname> system-view
[Sysname] monitor-link group 1
[Sysname-mtlk-group1] downlink up-delay 50