flush enable

Use flush enable to enable flush update.

Use undo flush enable to disable flush update.

Syntax

flush enable [ control-vlan vlan-id ]

undo flush enable

Default

Flush update is enabled for smart link groups, and VLAN 1 is used for flush message transmission.

Views

Smart link group view

Predefined user roles

network-admin

Parameters

control-vlan vlan-id: Specifies the control VLAN used for transmitting flush messages. The vlan-id argument represents the control VLAN ID in the range of 1 to 4094.

Usage guidelines

You must configure different control VLANs for different smart link groups.

• Make sure the configured control VLAN already exists, and assign the smart link group member ports to the control VLAN.

• The control VLAN of a smart link group must also be one of its protected VLANs. Do not remove the control VLAN. Otherwise, flush messages cannot be sent correctly.

Examples

# Disable flush update for smart link group 1.

<Sysname> system-view
[Sysname] smart-link group 1
[Sysname-smlk-group1] undo flush enable

Related commands

smart-link flush enable