ring enable

Use ring enable to enable an RRPP ring.

Use undo ring enable to disable the RRPP ring.

Syntax

ring ring-id enable

undo ring ring-id enable

Default

The RRPP ring is disabled.

Views

RRPP domain view

Predefined user roles

network-admin

Parameters

ring-id: Specifies an RRPP ring by its ID in the range of 1 to 128.

Usage guidelines

To activate an RRPP ring, you must enable RRPP and the RRPP ring.

Before you enable subrings on a device, you must enable the primary ring. Before you disable the primary ring on the device, you must disable all subrings. Otherwise, the system displays error prompts.

Examples

# Enable RRPP ring 10 in RRPP domain 1.

<Sysname> system-view
[Sysname] rrpp domain 1
[Sysname-rrpp-domain1] control-vlan 100
[Sysname-rrpp-domain1] protected-vlan reference-instance 0 1 2
[Sysname-rrpp-domain1] ring 10 node-mode master primary-port ten-gigabitethernet 1/0/1 secondary-port ten-gigabitethernet 1/0/2 level 0
[Sysname-rrpp-domain1] ring 10 enable

Related commands

rrpp enable