display rrpp statistics

Use display rrpp statistics to display RRPPDU statistics.

Syntax

display rrpp statistics domain domain-id [ ring ring-id ]

Views

Any view

Predefined user roles

network-admin

network-operator

Parameters

domain domain-id: Specifies an RRPP domain by its ID in the range of 1 to 128.

ring ring-id: Specifies an RRPP ring by its ID in the range of 1 to 128. If you do not specify this option, the command displays the RRPPDU statistics for all rings in the specified RRPP domain.

Usage guidelines

If a port belongs to more than one ring, this command collects and displays RRPPDU statistics of the port by ring.

When a ring transits from inactive status to active status, packet counting for the ring restarts.

Examples

# Display RRPPDU statistics for all rings in RRPP domain 2.

<Sysname> display rrpp statistics domain 2
 Ring ID       : 1
 Ring level    : 0
 Node mode     : Master
 Active status : Yes
 Primary port  : XGE1/0/3
 Fast-Hello packets: 0 Sent, 0 Received
 Fast-Edge-Hello packets: 0 Sent, 0 Received
  Direct Hello     Link     Common     Complete   Edge      Major     Total
                   down     flush FDB  flush FDB  hello     fault
 ------------------------------------------------------------------------------
  Out    16924     0        0          1          0         0         16925
  In     0         0        0          0          0         0         0
 Secondary port: XGE1/0/4
 Fast-Hello packets: 0 Sent, 0 Received
 Fast-Edge-Hello packets: 0 Sent, 0 Received
  Direct Hello     Link     Common     Complete   Edge      Major     Total
                   down     flush FDB  flush FDB  hello     fault
 ------------------------------------------------------------------------------
  Out    0         0        0          0          0         0         0
  In     16878     0        0          1          0         0         16879

 Ring ID       : 2
 Ring level    : 1
 Node mode     : Edge
 Active status : No
 Common port   : XGE1/0/3
 Fast-Hello packets: 0 Sent, 0 Received
 Fast-Edge-Hello packets: 0 Sent, 0 Received
  Direct Hello     Link     Common     Complete   Edge      Major     Total
                   down     flush FDB  flush FDB  hello     fault
 ------------------------------------------------------------------------------
  Out    0         0        0          0          0         0         0
  In     0         0        0          0          0         0         0
 Common port   : XGE1/0/4
 Fast-Hello packets: 0 Sent, 0 Received
 Fast-Edge-Hello packets: 0 Sent, 0 Received
  Direct Hello     Link     Common     Complete   Edge      Major     Total
                   down     flush FDB  flush FDB  hello     fault
 ------------------------------------------------------------------------------
  Out    0         0        0          0          0         0         0
  In     0         0        0          0          0         0         0
 Edge port     : XGE1/0/5
  Direct Hello     Link     Common     Complete   Edge      Major     Total
                   down     flush FDB  flush FDB  hello     fault
 ------------------------------------------------------------------------------
  Out    0         0        0          0          0         0         0
  In     0         0        0          0          0         0         0

Table 26: Command output

Field	Description
Ring ID	RRPP ring ID.
Ring level	RRPP ring level: 0—Primary ring. 1—Subring.
Node mode	Node mode: Master node. Transit node. Edge node. Assistant edge node.
Active status	RRPP ring status: Yes—Active. No—Inactive.
Primary port	The primary port field means the node mode is master node or transit node. A hyphen (-) appears when one of the following cases occurs: The port is not configured on the ring. The port is a member of a link aggregation group.
Secondary port	The secondary port field means the node mode is master node or transit node. A hyphen (-) appears when one of the following cases occurs: The port is not configured on the ring. The port is a member of a link aggregation group.
Common port	The common port field means the node mode is edge node or assistant edge node. A hyphen (-) appears when one of the following cases occurs: The port is not configured on the ring. The port is a member of a link aggregation group.
Edge port	The edge port field means the node mode is edge node or assistant edge node. A hyphen (-) appears when one of the following cases occurs: The port is not configured on the ring. The port is a member of a link aggregation group.
Fast-Hello packets	Fast-Hello packet statistics on the port: Sent—Number of Fast-Hello packets sent out of the port. Received—Number of Fast-Hello packets received on the port.
Fast-Edge-Hello packets	Fast-Edge-Hello packet statistics on the port: Sent—Number of Fast-Edge-Hello packets sent out of the port. Received—Number of Fast-Edge-Hello packets received on the port.
Packet direct	Packet transmission direction on the port: Out—Packet sending direction. In—Packet receiving direction.
Hello	Statistics of Hello packets received/sent on the port.
Link down	Statistics of Link-Down packets received/sent on the port.
Common flush FDB	Statistics of Common-Flush-FDB packets received/sent on the port.
Complete flush FDB	Statistics of Complete-Flush-FDB packets received/sent on the port.
Edge hello	Statistics of Edge-Hello packets received/sent on the port.
Major fault	Statistics of Major-Fault packets received/sent on the port.
Total	Total number of packets received/sent on the port. Only Hello, Link-Down, Common-Flush-FDB, Complete-Flush-FDB, Edge-Hello, and Major-Fault packets of RRPP are counted.

Related commands

reset rrpp statistics

prev	up	next
display rrpp ring-group	home	display rrpp verbose