dldp unidirectional-shutdown

Use dldp unidirectional-shutdown to set the port shutdown mode.

Use undo dldp unidirectional-shutdown to restore the default.

Syntax

dldp unidirectional-shutdown { auto | manual }

undo dldp unidirectional-shutdown

Default

The port shutdown mode is auto mode.

Views

System view

Predefined user roles

network-admin

Parameters

auto: Configures the port shutdown mode as auto mode. In this mode, when DLDP detects a unidirectional link, it shuts down the unidirectional port.

manual: Configures the port shutdown mode as manual mode. In this mode, when DLDP detects a unidirectional link, DLDP does not shut down the involved port but you must manually shut it down. When the link state is restored to bidirectional, you must manually bring up the port.

Examples

# Set the port shutdown mode to manual mode.

<Sysname> system-view
[Sysname] dldp unidirectional-shutdown manual

Related commands

display dldp