display dldp statistics
Use display dldp statistics to display the statistics on the DLDP packets passing through a port.
Syntax
display dldp statistics [ interface interface-type interface-number ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
interface interface-type interface-number: Specifies a port by its type and number.
Usage guidelines
If no port is specified, this command displays the statistics on the DLDP packets passing through all the DLDP-enabled ports.
Examples
# Display the statistics on the DLDP packets passing through all the DLDP-enabled ports.
<Sysname> display dldp statistics Interface Ten-GigabitEthernet1/0/1 Packets sent: 6 Packets received: 5 Invalid packets received: 2 Loopback packets received: 0 Authentication-failed packets received: 0 Valid packets received: 3 Interface Ten-GigabitEthernet1/0/2 Packets sent: 7 Packets received: 7 Invalid packets received: 3 Loopback packets received: 0 Authentication-failed packets received: 0 Valid packets received: 4
Table 23: Command output
Field | Description |
|---|---|
Interface | Port index. |
Packets sent | Total number of DLDP packets sent. |
Packets received | Total number of DLDP packets received. |
Invalid packets received | Number of the invalid packets received. |
Loop packets received | Number of the loopback packets received. |
Authentication failed packets received | Number of the received packets that failed to pass the authentication. |
Valid packets received | Number of the valid packets received. |
Related commands
reset dldp statistics