display cfd service-instance
Use display cfd service-instance to display the configuration information of service instance.
Syntax
display cfd service-instance [ instance-id ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
instance-id: Specifies a service instance ID in the range of 1 to 32767. If you do not specify this argument, the configuration information of all service instances is displayed.
Examples
# Display the configuration information of all service instances.
<Sysname> display cfd service-instance Service instances configured (2 in total): Service instance 5: Maintenance domain: md_5 Maintenance domain index: 5 Maintenance association: ma_5 Maintenance association index: 5 Level: 5 VLAN: 5 MIP rule: NONE CCM interval: 1s Direction: Inbound MEP ID: 730 Interface: Ten-GigabitEthernet1/0/1 Service instance 6: Maintenance domain: (Without ID) Maintenance domain index: 6 Maintenance association: ma_6 Maintenance association index: 6 Level: 6 VLAN: 6 MIP rule: NONE CCM interval: 1s Direction: Outbound MEP ID: 731 Interface: Ten-GigabitEthernet1/0/2
Table 20: Command output
Field | Description |
|---|---|
Service instances are configured. | Number of service instances configured. |
Service instance | Service instance ID. |
Maintenance domain | MD of the service instances. (If the MD does not have a name, this field displays Without ID.) |
Maintenance domain index | Index of the MD to which the service instances belong. |
Maintenance association: | MA of the service instances. |
Maintenance association index | Index of the MA to which the service instances belong. |
Level | MD level. |
VLAN | VLAN to which the MA belongs. |
MIP rule | MIP generation rules configured on service instance. |
CCM interval | Interval to send CCMs. |
Direction | Direction of the MEPs configured on the service instance. |
MEP ID | ID of MEPs configured on the service instance. |
Interface | Interface of the MEP configured on the service instance. |