display cfd mp
Use display cfd mp to display the MP information.
Syntax
display cfd mp [ interface interface-type interface-number ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
interface interface-type interface-number: Specifies a port by its port type and port number. If you do not specify this option, MP information on all ports is displayed.
Usage guidelines
The output is arranged by port name. On a port, the output shows MPs that serve VLANs, and then shows MPs that do not serve any VLANs. The MPs that serve VLANs are displayed in the ascending VLAN ID order. Within the same VLAN, the output is in the order of MIPs and MEPs (from high to low level). The MEPs that do not serve any VLANs are displayed by level (from high to low).
Examples
# Display the MP information on all ports.
<Sysname> display cfd mp Interface Ten-GigabitEthernet1/0/1 VLAN 100 MIP Level: 2 Service instance: 102 Maintenance domain: md_2 Maintenance domain index: 3 Maintenance association: ma_2 Maintenance association index: 3 MEP ID: 101 Level: 1 Service instance: 101 Direction: Inbound Maintenance domain: md_1 Maintenance domain index: 2 Maintenance association: ma_1 Maintenance association index: 2 MEP ID: 100 Level: 0 Service instance: 100 Direction: Outbound Maintenance domain: md_0 Maintenance domain index: 1 Maintenance association: ma_0 Maintenance association index: 1
Table 18: Command output
Field | Description |
---|---|
Interface Ten-GigabitEthernet1/0/1 VLAN 100 | MP configuration of VLAN 100 on Ten-GigabitEthernet 1/0/1. |
MIP | A MIP in the MP. |
Level | MD level to which an MP belongs. |
Service instance | Service instance to which the MP belongs. |
Maintenance domain | MD to which an MP belongs. |
Maintenance domain index | Index of the MD to which an MP belongs. |
Maintenance association | MA to which an MP belongs. |
Maintenance association index | Index of the MA to which an MP belongs. |
Direction | Direction of the MEP, inbound or outbound. |