Configuring the temperature alarm thresholds
The device monitors its temperature through temperature sensors, based on the following thresholds:
Low-temperature threshold.
High-temperature warning threshold.
High-temperature alarming threshold.
When the temperature drops below the low-temperature threshold or reaches the high-temperature warning threshold, the device performs the following tasks:
Logs the event.
Sends a log message.
Sends a trap.
When the temperature reaches the high-temperature alarming threshold, the device performs the following tasks:
Logs the event.
Sends log messages repeatedly.
Sets the LEDs on the device panel.
To configure the temperature alarm thresholds:
Step | Command | Remarks |
|---|---|---|
1. Enter system view. | system-view | N/A |
2. Configure the temperature alarm thresholds. | temperature-limit slot slot-number hotspot sensor-number lowlimit warninglimit [ alarmlimit ] | To view the default settings, use the undo temperature-limit command to restore the defaults and then execute the display environment command. The high-temperature alarming threshold must be higher than the high-temperature warning threshold. The high-temperature warning threshold must be higher than the low-temperature threshold. |