ISSU task list
Tasks at a glance | Remarks |
---|---|
(Optional.) Decompressing an .ipe file | To use install commands for upgrade, you must use .bin image files. If the upgrade file is an .ipe file, perform this task before you use install commands for upgrade. |
(Required.) Perform one of the following tasks to update software: | Perform an activate operation to install new images or upgrade existing images. Perform an inactivate operation to uninstall feature or patch images. An image is added to or removed from the current software image list when it is activated or deactivated. |
(Optional.) Rolling back the running software images | Perform this task to roll back running software image status after activate or deactivate operations. A commit operation removes all rollback points. You can perform this task only before software changes are committed. |
(Optional.) Aborting a software activate/deactivate operation | You can perform this task while an image is being activated or deactivated. This task is available only for service upgrade or file upgrade. |
(Optional.) Committing software changes | This task updates the main startup image list with the changes. If service upgrade or file upgrade is performed, you must perform this task for the changes to take effect after a reboot. |
(Optional.) Verifying software images | Perform this task to verify that the software changes are correct. |
(Optional.) Removing inactive software images | Perform this task to remove images |