Configuring user role authentication
Step | Command | Remarks |
---|---|---|
1. Enter system view. | system-view | N/A |
2. Set an authentication mode. | super authentication-mode { local | scheme } * | By default, local-only authentication applies. |
3. (Optional.) Specify the default target user role for temporary user role authorization. | super default role rolename | By default, the default target user role is network-admin. |
4. Set a local authentication password for a user role. |
| Use this step for local password authentication. By default, no password is configured. If you do not specify the role rolename option, the command sets a password for the default target user role. |