Accessing the device through SNMP

You can run SNMP on an NMS to access the device MIB and perform Get and Set operations to manage and monitor the device.

Figure 10: SNMP access diagram

The device supports SNMPv1, SNMPv2c, and SNMPv3, and can cooperate with various network management software products, including IMC. However, the device and the NMS must use the same SNMP version. For more information about SNMP, see Network Management and Monitoring Configuration Guide.

By default, SNMP access is disabled. To access the device through SNMP, you must log in to the device through any other method and configure SNMP access.