Using the device to log in to an SSH server

You can use the device as an SSH client to log in to an SSH server. If the server is located in a different subnet than the device, make sure the two devices have routes to reach each other.

Figure 5: Logging in to an SSH client from the device

Perform the following tasks in user view:

Task

Command

Log in to an IPv4 SSH server.

ssh2 server

Log in to an IPv6 SSH server.

ssh2 ipv6 server

To work with the SSH server, you might need to configure the SSH client. For information about configuring the SSH client, see Security Configuration Guide.