Configuring scheme authentication for console login
Step | Command | Remarks |
---|---|---|
1. Enter system view. | system-view | N/A |
2. Enter AUX line view or class view. |
| A setting in user line view is applied only to the user line. A setting in user line class view is applied to all user lines of the class. A non-default setting in either view takes precedence over a default setting in the other view. A non-default setting in user line view takes precedence over a non-default setting in user line class view. A setting in user line view takes effect immediately and affects the online user. A setting in user line class view does not affect online users and takes effect only for new login users. |
3. Enable scheme authentication. | authentication-mode scheme | By default, authentication is disabled for the AUX line. |
To use scheme authentication, you must also perform the following tasks:
Configure login authentication methods in ISP domain view.
To use remote authentication, configure the scheme to be used.
To use local authentication, configure a local user and the relevant attributes.
For more information, see Security Configuration Guide.
The next time you log in through the console port, you must provide the configured login username and password.