Specifying a source IP address or source interface for the Stelnet client
When an Stelnet client accesses the Stelnet server, the Stelnet client uses the IP address of the outbound interface as the source IP address by default. The Stelnet client determines the outbound interface based on the routing table lookup. You can change the source IP address or specify a source interface for the Stelnet client.
Hewlett Packard Enterprise recommends that you specify a loopback interface as the source interface for the Stelnet client for the following purposes:
Ensuring the communication between the Stelnet client and the Stelnet server.
Improving the manageability of Stelnet clients in authentication service.
To specify a source IP address or source interface for the Stelnet client:
Step | Command | Remarks |
|---|---|---|
1. Enter system view. | system-view | N/A |
2. Specify a source IP address or source interface for the Stelnet client. |
| Use either command. |