Configuring IPsec for IPv6 routing protocols

Complete the following tasks to configure IPsec for IPv6 routing protocols:

Task	Remarks
Configuring an IPsec transform set	Required.
Configuring a manual IPsec policy	Required. ACLs and IPsec tunnel addresses are not needed.
Applying an IPsec policy to an IPv6 routing protocol.	Required. See Layer 3—IP Routing Configuration Guide.

Task

Remarks

Required.

Required.

ACLs and IPsec tunnel addresses are not needed.

Applying an IPsec policy to an IPv6 routing protocol.

Required.

See Layer 3—IP Routing Configuration Guide.

prev	up	next
Configuring packet information pre-extraction	home	Displaying and maintaining IPsec