Specifying a portal server for Layer 3 portal authentication
Perform this task to specify portal server parameters for Layer 3 portal authentication, including the external portal server IP address, shared encryption key, server port, and the URL address for Web authentication.
Follow these guidelines when you specify a portal server for Layer 3 authentication:
The specified parameters of a portal server can be modified or deleted only if the portal server is not referenced on any interface.
To make sure the device can send packets to the portal server in an MPLS VPN, specify the VPN instance to which the portal server belongs when specifying the portal server on the device.
To specify a portal server for Layer 3 authentication:
Step | Command | Remarks |
|---|---|---|
1. Enter system view. | system-view | N/A |
2. Specify a portal server and configure related parameters. | portal server server-name { ip ipv4-address [ key [ cipher | simple ] key-string | port port-id | url url-string | vpn-instance vpn-instance-name ] * | ipv6 ipv6-address [ key [ cipher | simple ] key-string | port port-id | url url-string ] * } | By default, no portal server is specified. |