Configuring a port to send EAPOL frames untagged
EAPOL frames exchanged between the 802.1X client and the network access device cannot contain VLAN tags. If any 802.1X user attached to a port is assigned a tagged VLAN, you must enable the port to send EAPOL frames untagged to 802.1X clients.
To configure a port to send EAPOL packets untagged to 802.1X clients:
Step | Command | Remarks |
|---|---|---|
1. Enter system view. | system-view | N/A |
2. Enter Ethernet interface view. | interface interface-type interface-number | N/A |
3. Configure the port to send 802.1X EAPOL frames untagged. | dot1x eapol untag | By default, whether the port sends EAPOL packets with a VLAN tag depends on the VLAN settings on the port. |